- pH: 10.4
- Primary Application: Multi-metal spray cleaner
- VOC: (g/L): 80
- Foam: none
- NFPA: 1, 0, 0
- Sizing: 55
NuGeneration Technologies’ AquaKlean EF105LF is a very low-foaming, mildly alkaline liquid cleaner for use in spray or tank applications. The non-silicated and non-caustic formula will not sludge or form a scale while the mildly alkaline formula allows AquaKlean EF105LF to be used as a multi-metal cleaner. AquaKlean EF105LF may be used in solvent replacement tanks with hand brushing operations.
Other acceptable materials include plastics, ceramics, and glass.
AquaKlean EF105LF was formulated to provide improved removal of particulates and organics with reduced residues and fast rinsing. AquaKlean EF105LF provides excellent wetting and rinsing properties and is therefore an excellent choice for pre-plate cleaning. The built-in corrosion inhibitors protect aluminum and ferrous alloys.
Removes inks, polishing and buffing compounds, grease, oils, fingerprints, drawing compounds, and metalworking fluids.
Directions for Use:
AquaKlean EF105LF is effective at ambient temperatures. However, it is normally used at 1 – 10% by volume of water at 60 – 165°F for 5 seconds to 5 minutes. The parameters can vary depending on the type and extent of soils being removed. Temperatures may be increased slightly for shorter time cycles. Not safe on Magnesium. Test for discoloration on cuprous alloys.
● Multi-metal spray and tank cleaner and degreaser
● Built in corrosion (Flash Rust) inhibitors
● Low foaming tendency
● Excellent micro-etch for Aluminum & Aluminum alloys