- Primary Application: non-emulsifying, neutral pH, non-foaming, multi-metal cleaner
- pH: 9.8
- VOC: (g/L): 0
- Foam: none
- NFPA: 1, 0, 0
- Sizing: 55-Gal
NuGeneration Technologies’ AquaKlean 1400 is a mildly alkaline, low-foaming liquid cleaner for use in both spray and tank applications.
The non-silicated and non-caustic formula will not sludge or form a scale while the mildly alkaline formula allows AquaKlean 1400 to be used as a multi-metal cleaner.
Other acceptable materials include plastics, ceramics, and glass.
AquaKlean 1400 was formulated to provide improved removal of particulates and organics while providing reduced residues and fast rinsing. AquaKlean 1400 provides excellent wetting and rinsing properties and is an excellent choice for pre-plate cleaning.
Removes inks, polishing and buffing compounds, grease, oils, fingerprints, drawing compounds, and metalworking fluids.
Directions for Use:
AquaKlean 1400 is effective at ambient temperatures. However, it is normally used at 1 – 10% by volume of water at 120 – 165°F for 5 seconds to 5 minutes. The parameters can vary depending on the type and extent of soils being removed. Temperatures may be increased slightly for shorter time cycles. Not safe on Magnesium. Test for discoloration on cuprous alloys.
- Multi-metal spray and tank cleaner and degreaser
- Excellent oil splitting capability for recirculating systems
- To the best of our knowledge, this product is California Prop 65 compliant.