- Primary Application: Post Polish Cleaning
- pH: 12.7
- VOC: (g/L): 0
- Foam: Low foam
NuWet™ DM 50: Highly Alkaline Aqueous Cleaner. Removal of polishing compounds and machining fluids on plated surfaces, glass, silicon, GaAs, polymers, stainless steel, and steel.
Application Notes: NuGeneration Technologies’ NuWet DM 50 has been formulated with the needs of the electronics and medical device industries in mind. All of our products are manufactured with the highest-grade raw materials using 18 MOhm DI water then filtered to meet customers’ requirements before packaging. Our products are cost effective i.e. formulated for extended bath life, contain no chelates, are safe to use (contain NO Prop 65 or SARA 313 ingredients), biodegradable and are easily disposed of(1) of thereby reducing the cost of waste treatment.
NuWet cleaners were formulated to provide improved removal of particulates and organics while providing reduced residues, and fast rinsing. NuWet DM 50 provides excellent wetting proprieties and is, therefore, an excellent choice for pre-plate and sputter cleaning. The extremely fast rinsing properties of NuWet DM 50 allow for less water consumption, and shorter rinsing cycle times improving throughput and cost.
Typical usage parameters:
Description Highly alkaline cleaner
Concentration Range 5%-25%
Operating temps ambient to 145 °F
pH, concentrate 14
pH, @ 5% b.v. 12.7
Bulk Density, #/gal 9.7
Flash point None
Solubility in water Complete
Ozone friendly Yes