- Primary Application: Post Polish Cleaning
- pH: 12.8
- VOC: (g/L): 75
- Foam: Low foam
NuWet™ DM41: Alkaline Aqueous Cleaner. Removal of polishing compounds, machining fluids oils and particulates on plated surfaces, glass, silicon, GaAs, polymers, titanium, nitinol, stainless steel, and steel.
NuGeneration Technologies’ NuWet DM 41 has been formulated with the needs of the electronics and medical device industries in mind. All of our products are manufactured with the highest-grade raw materials using 18 MOhm DI water then filtered to meet customers’ requirements before packaging. Our products are cost effective i.e. formulated for extended bath life, contain no chelates, are safe to use (contain NO Prop 65 or SARA 313 ingredients), biodegradable and are easily disposed of thereby reducing the cost of waste treatment.
NuWet cleaners were formulated to provide improved removal of particulates and organics while providing reduced residues, and fast rinsing. NuWet DM 41 provides excellent wetting proprieties and is there, therefore, an excellent choice for pre-plate, electro-polish and sputter cleaning. The extremely fast rinsing properties of NuWet DM 41 allow for less water consumption, and shorter rinsing cycle times improving throughput and cost. Triple-reverse-cascade rinsing is still recommended for the most effective rinsing.
Typical usage parameters:
Description Highly alkaline cleaner
Concentration Range 5%-25%
Operating temps ambient to 145 °F
pH, concentrate 13.7
pH, @ 5% b.v. 12.8
Bulk Density, #/gal 9.5
Solubility in water Complete
Ozone friendly Yes
- To the best of our knowledge, this product is California Prop 65 compliant.