Due to COVID-19, NuGenTec now provides various bulk hand sanitizer options for essential industries and commercial use, with 95% of our orders shipping within 2-days. PPE products are coming soon.  Prices have been reduced on 2-oz, 8-oz, 16-oz, and 1-gallon sizes!

High Performance Specialty Chemicals & Services Contact Us

NuKoat RP10 Cleaner and Rust Inhibitor

  • nugentec_nukoat_drum

Part Number: nukrp10
  • Primary Application: Non-Nitrated Liquid Cleaner and Rust Inhibitor
  • pH: 10.5
  • VOC: (g/L): 0
  • Foam: No
  • Water Soluble: Yes
  • Oil Based: No
Download MSDS:
Download TDS:

Non-nitrated, silicate-free liquid cleaner/rust inhibitor for use on ferrous and non-ferrous metals including Aluminum and Zinc.


NuGeneration Technologies’ NuKoat RP10 is a non-nitrated, non-caustic, silicate-free liquid cleaner/rust inhibitor.  Cleaning and leaving a dry film to protect metals from rust during indoor storage in one easy step.  Protection typically lasts for up to 3 months depending upon conditions. An amine-based formula along with the addition of a special inhibitor package makes NuKoat RP10 a versatile rust preventative solution.  Not for use on Copper/Cuprous alloys.


NuKoat RP10 was formulated to provide improved rust/flash rust protection after an in-process cleaning step that removes many shop soils and oils.  NuKoat RP10 is specially formulated to be used in multi-metal applications such as ferrous and non-ferrous metals including Aluminum, Zinc, rubber gaskets and PVC.  Not for use on Copper/Cuprous alloys.

Directions for Use:

NuKoat RP10 is applied by either spray or immersion.  Coatings can be heat-treated, and, if desired, can be easily removed with a mild cleaner.   NuKoat RP10 should be run at 3 - 10% by volume of water at 70° to 160°F for 15 seconds to 3 minutes depending upon the application.

Product Benefits:

  • Multi-metal cleaner and rust inhibitor
  • Biodegradable and non-foaming
  • Non-nitrated, non-caustic and silicate-free
  • Excellent oil splitting capability for recirculating systems
  • To the best of our knowledge, this product is California Prop 65 compliant.

Physical Properties    


Use concentration (spray or immersion)

3 - 10% by volume

Bulk Density

8.5 lbs/gal     

Operating Temps

70 °F to 160 °F      

pH, Concentrate

10.5 - 11.0

pH, @5%

10.3 - 10.8

VOC (Concentrate)

154 g/L    

Flash Point




Soluble in water