Primary Application: Brass & Copper Corrosion Preventative
VOC: (g/L): 0
Water Soluble: Yes
Oil Based: No
Corrosion Inhibitor for Modified Alcohol Solvents
Corrosion inhibiting additive for use with modified alcohol solvents that provides short and long term indoor storage corrosion protection for a variety of metals.
NuGeneration Technologies’ NuKoat 911B is a non-nitrated, non-caustic, silicate-free, amine-free, non-aqueous liquid corrosion inhibitor. When used in conjunction with modified alcohol solvents such as NuSolv M63X, NuKoat 911B leaves a dry film to protect metals from corrosion during indoor storage in one easy step. Protection typically lasts for up to 3 months depending upon conditions. An amine-free formula along with the addition of a special inhibitor package makes NuKoat 911B a versatile rust preventative solution that is able to be used on Copper/Cuprous alloys.
NuKoat 911B was formulated to provide improved rust/flash rust protection after an in-process cleaning step that removes many shop soils and oils. NuKoat 911B is specially formulated to be used in multi-metal applications such as ferrous and non-ferrous metals including Aluminum, Zinc, Copper, and Cuprous alloys, rubber gaskets and PVC.
Directions for Use: NuKoat 911B is applied by dosing into NuSolv M63X or other modified alcohol solvents. Coatings can be heat-treated, and, if desired, can be easily removed with a mild cleaner. NuKoat 911B should be run at 0.1-2.0% by volume of NuSolv M63X or other modified alcohol solvent at ambient temperatures for 15 seconds to 3 minutes depending upon the application.
To the best of our knowledge, this product is California Prop 65 compliant.
0.1-2.0% by volume
30 °C (86 °F)
Soluble in water
83 °C (181 °F)