High Performance Specialty Chemicals & Services Contact Us
Print this page

NuKlean® NCFR and NCFR-Plus No-Clean Flux Remover

  • Flux removal with water based cleaning solution
  • how to remove flux from a circuit board
  • How to clean flux from printed circuit boards
Click image to enlarge
Quantity:  

Product Files

No-Clean Flux Removers: NuKlean® NCFR and NuKlean® NCFR Plus

Cleaning solution for removing No-Clean Fluxes from SMT and BGA circuit boards, connectors and components:  Effective at removing fluxes, No-Clean Fluxes, pastes, organic residues, adhesives, greases, and oils.

Description:

NuGeneration Technologies’ NuKlean NCFR and NCFR Plus products are synergistic mixtures of solvents used to remove No-Clean Flux Residues, fluxes, pastes, organic residues, adhesives, greases and oils from SMT and BGA circuit boards, connectors and components.  NuKlean NCFR and NCFR Plus remove polar and ionic activators quickly and effectively and are excellent white-residue removers.  NuKlean NCFR Plus is a more robust formula than NuKlean NCFR and contains a highly effective, proprietary solvent that cuts through the most tenacious No-Clean Fluxes, however, it does not meet the criteria for CMR compliance according to CLP Regulation 1272/2008.  NuKlean NCFR is a CMR compliant formula.

Performance Characteristics of NuKlean NCFR

NuKlean NCFR and NCFR Plus were formulated to be highly effective at removing No-Clean Fluxes from SMT and BGA circuit boards, connectors and components that can interfere with conformal coating adhesion and durability.  NuKlean NCFR and NCFR Plus are non-flammable and low foaming, so they are able to be used in dip-tank, ultrasonic or spray applications, making them both very versatile cleaners.

Directions for Use

NuKlean NCFR and NCFR Plus can be used at 15-50% concentration, depending upon the desired use.  If cleaning fluxes, no-clean fluxes, pastes, organic residues, adhesives, greases or oils from SMT and BGA circuit boards, connectors, and components, use at 15-50% at 25-60 °C (77-140 °C) for 5 seconds to 5 minutes in dip-tank, ultrasonic or spray tank.  The parameters can vary due to the type and extent of soils to be removed.  Benefits of NuKlean NCFR No-Clean Flux Remover.​
 
Physical Properties of NuKlean NCFR and NCFR Plus
Physical Properties NCFR and NCFR Plus
Use concentration (dip tank / ultrasonic, spray) 15-50% by volume
Bulk Density 8.4 lbs/gal 
Operating Temps Ambient to 60 °C 
Boiling Point 100 °C
pH, @100% 10.2
VOC (Concentrate, NuKlean NCFR)
VOC (Concentrate, NuKlean NCFR Plus)
192 g/L
292 g/L
Flash Point None
Toxic? No
Leaves Residue?  No
Contains Ionics?  No

Contact Us for Fast, Effective No-Clean Flux Removers

NuKlean NCFR and NCFR Plus are two of the fastest and most effective no-clean flux removers on the market. Contact NuGenTec today to learn more about NuKlean NCFR or any of our specialty chemicals and cleaners.​
  
NuKlean NCFR and NCFR-PLUS No-Clean Flux Remover