Description:
NuGeneration Technologies’ AquaKlean® H4H is a low foaming, multi-metal cleaner ideal for use in spray, ultrasonic and soak cleaning. AquaKlean H4H operates at a mild pH of 10.0, making it highly effective and safe on all metals including soft, amphoteric metals such as Aluminium, Tin, Zinc and their alloys such as Brass and Bronze. AquaKlean H4H is a robust, high-performance cleaner able to be used in a wide range of cleaning application and is used as a drop-in replacement for Brulin Formula 815GD.
Characteristics:
AquaKlean® H4H was formulated to provide improved removal of particulates and organics while providing reduced residues, and fast rinsing. AquaKlean H4H remains clear in both concentrate and dilution during use, and maintains low foaming tendencies over a wide temperature range, allowing for efficient and powerful cleaning and residue-free, spotless rinsing. Removes: inks, polishing and buffing compounds, grease, oils, fingerprints, drawing compounds, and metalworking fluids. With built-in flash rust and corrosion inhibition package, AquaKlean H4H provides complete protection in heat treatment, annealing, or storage conditions.
Directions for Use:
AquaKlean® H4H is effective at ambient temperatures. However, it is normally used at 1 to 10% by volume of water at 60 °F to 165 °F for 5 seconds to 5 minutes. The parameters can vary due to the type and extent of soils to be removed. Temperatures may be increased slightly for shorter time cycles.
| Physical Properties |
AquaKlean® H4H |
| Use concentration |
1 - 10% by volume |
| Bulk Density |
9.4 lbs/gal |
| Operating Temps |
60°F and up
Best >120° to 165°F |
| pH, Concentrate |
10.0-10.2 |
| pH, @5% |
9.8-10.0 |
| VOC (@ 10% b.v.) |
<7 g/L @ 10% |
| Flash Point |
None |
| Chelates |
Yes |
| Soluble in water |
Complete |
| Biodegradable |
Yes |
| Corrosive |
No |
Availability: 5-gallon and 55-gallon containers, 275-gallon totes and bulk tankers.
Shipment: DOT – Non-Regulated Material, Liquid
Storage: Keep out of direct sunlight. Keep from freezing. Store between 40 °F - 120 °F.
Disposal: Dispose of in accordance with local, state, and federal regulations. For assistance with disposal contact NuGeneration Technologies at 888-99-NuGen or email: info@nugentec.com.
Regulatory: This product is classified and labeled according to the Globally Harmonized System (GHS).
EMERGENCY OVERVIEW:
This product may cause irritation to the skin and eyes.
SAFETY:
Please make sure you have read and understand the product label and SDS before using this product. Avoid breathing vapors, spray or mists. Use only with adequate ventilation. Wash thoroughly after handling. Observe label precautions.
