High Performance Specialty Chemicals & Services Contact Us
Print this page

NuSolv D6368ES

Description:
NuGeneration Technologies’ NuSolv™ D6368ES is a stabilized, true
azeotropic formula based on n-Propyl Bromide and Isopropyl Alcohol used
to remove solder fluxes, pastes, ionic residues, particulates, greases,
resins, inks, silicone oils, buffing compounds, drawing oils and lapping
compounds from a variety of surfaces including electronic and circuit
assemblies, ferrous and non-ferrous alloys including Copper, Copper alloys
(brass, bronze, etc.), Nickel, steel, stainless steel, Titanium, Zinc, and
Aluminum.
 
Characteristics:
NuSolv™ D6368ES was formulated to be used at both ambient temperatures for cold-cleaning/wipe
applications as well as at elevated temperatures for vapor phase cleaning. NuSolv™ D6368ES contains a
mixture of solvents, allowing for effective removal of a wide variety of soils. NuSolv™ D6368ES has very high
solvency, with a Kb value of >130,, making it a superior drop-in replacement for trichloroethylene (TCE),
perchloroethylene (PCE), methylene chloride (MeCl), and expensive alternatives such as hydrofluorocarbons
(HFC’s) and hydrofluoroethers (HFE’’s), as well as an alternative to standard nPB. NuSolv™ D6368ES is a
non-flammable solvent, and is SNAP approved due to its negligible impact on the ozone layer. NuSolv™
D6368ES is hydrolytically stable in the presence of water contamination, which is a common problem in vapor
degreasing. NuSolv™ D6368ES conforms to Table 1 of ASTM D6368-06.
Directions for Use:
NuSolv™ PNPB is used at 100% concentration, and is effective at ambient temperatures in cold cleaning and
wipe applications. However, it can also be used up to 54 °C (148 °F) for 5 seconds to 5 minutes for vapor
phase cleaning. The parameters can vary due to the type and extent of soils to be removed.
 
Product Benefits:
 
 
● High-performance, environmentally friendly solvent blend.
● Effective at ambient temperatures for cold-cleaning applications, or at
elevated temperatures for vapor phase cleaning.
● Ideal for removing flux residue, ionics, particulates, pastes, oils and greases

Availability:  1-gallon, 5-gallon, 55-gallon, 275-gallon totes and bulk tankers.

Shipment:  Non-regulated material, liquid

Storage:  Keep out of direct sunlight.  Keep from freezing.
Store between 40 °F - 120 °F.

Disposal:  Dispose of in accordance with local, state, and federal regulations. For assistance with disposal contact NuGeneration Technologies at 888-99-NuGen or email: salesteam@nugentec.com.