- Type: VISCOSITY REDUCER & FLOW ENHANCER
- NFPA: 1, 2, 0
- pH: 7.0
- Flash Point (C): 10
- Freezing Point (C): -45
Paraffin and Asphaltene Treatment (Economy Grade)
Description: NuFlo® 151XPE
is a proprietary-formulated, rapid-acting composition designed for the removal of paraffin and asphaltene buildup and blockages. NuFlo® 151XPE
has been designed to remove paraffin and asphaltene formations wherever they exist in a petroleum system; whether they are in flowlines, tanks, separators, or pipelines.
Characteristics: NuFlo® 151XPE is designed to dissolve and disperse asphaltenes, neutral resins, and paraffins in the C8-C55 range at ambient temperatures and eliminates production-inhibiting deposits. Our product decreases drag created by the high viscosity of crude oil, thus increasing overall production of your petroleum system. NuFlo® 151XPE works in a wide range of temperatures and pressures allowing it to be an appropriate treatment method for almost any condition.
- Used in pipelines to remove deposits and therefore increase flow while reducing pumping pressure.
- Used downhole or in pipelines to clean and prevent asphaltene and paraffin blockages while enhancing flow.
- Used downhole for squeeze jobs, down capillary strings, or down back-side for wellbore cleaning.
- Paraffin wax modifier
- Paraffin & Asphaltene Control
- Flow Enhancer
- Pipeline pressure reducer
- To the best of our knowledge, this product is California Prop 65 compliant.
|NuFlo 151XPE || |
|BULK DENSITY ||6.3 lbs/.gal |
|SPECIFIC GRAVITY@ 20 C ||0.758 g/cm³ |
|SOLUBILITY IN WATER ||Difficult to mix |
|SELF-DEMULSIFYING ||Yes |
|ODOR ||Mild |
|FLASH POINT ||10 °C (50 °F) |
|VISCOSITY ||1 mPas |
|MELTING POINT / FREEZING POINT ||-45 °C (-49 °F) |
|BOILING POINT ||85 °C (185 °F) |
|pH ||7.0 |
|APPEARANCE and COLOR ||Light yellow |
|VAPOR PRESSURE, mm Hg ||6.6 hPa (5 mmHg) |
5-gallon, 55-gallon containers and 275-gallon tote-bins and bulk tankers.Shipment:
UN 1993 FLAMMABLE LIQUIDS, N.O.S. (PROPRIETARY NAPHTHA SOLVENT), 3, IIStorage:
Keep out of direct sunlight. Keep from freezing. Store between 40-100°F.Disposal:
Dispose of in accordance with local, state, and federal regulations.
This product is classified and labeled according to the Globally Harmonized System (GHS). EMERGENCY OVERVIEW: This product may cause irritation to the skin. Defatting of the skin can occur with frequent or long-term skin contact.
Please make sure you have read and understand the product label and MSDS before using this product. Avoid breathing vapors, spray or mists. Use only with adequate ventilation. Wash thoroughly after handling. Observe label precautions.
Paraffin and Asphaltene Treatment