Due to COVID-19, NuGenTec now provides various bulk hand sanitizer options for essential industries and commercial use, with 95% of our orders shipping within 2-days. PPE products are coming soon.  Prices have been reduced on 2-oz, 8-oz, 16-oz, and 1-gallon sizes!

High Performance Specialty Chemicals & Services Contact Us

AquaKlean® RP700 | In-Process Rust Protection | Water Based

Click image to enlarge
  • Primary Application: Cleaner and Rust Inhibitor - In-Process
  • pH: 10.5
  • VOC: (g/L): 6.2
  • Foam: Low
  • Water Soluble: Yes
  • Oil Based: No

Cleaner and Rust Inhibitor - In-Process

Non-nitrated, silicate-free liquid cleaner/rust inhibitor for use on ferrous and non-ferrous metals including Copper/Copper alloys, Aluminum and Zinc.


NuGeneration Technologies’ AquaKlean® RP700 is a non-nitrated, non-caustic, silicate-free liquid cleaner/rust inhibitor. RP700 cleans and leaves a dry film to protect metals from rust during indoor storage in one easy step. Protection typically lasts for up to 3 months depending upon conditions. Our amine-free formula and inhibitor package makes AquaKlean RP700 highly compatible with copper and copper alloys.


AquaKlean RP700 was formulated to provide improved rust/flash rust protection after an in-process cleaning step that removes many shop soils and oils. AquaKlean RP700 is specially formulated to be used in multi-metal applications such as ferrous metals; non-ferrous metals including copper and copper alloys, aluminum, and zinc; rubber gaskets and PVC.

Directions for Use:

AquaKlean RP700 is applied by either spray or immersion. Coatings can be heat-treated and, if desired, can be easily removed with a mild cleaner. AquaKlean RP700 should be run at 3 – 10% by volume of water at 70 – 160°F for 15 seconds to 3 minutes depending upon the application.

Product Benefits:

  • Multi-metal cleaner and rust inhibitor
  • Biodegradable and non-foaming
  • Non-nitrated, non-caustic and silicate-free
  • Excellent oil splitting capability for recirculating systems
  • To the best of our knowledge, this product is California Prop 65 compliant.



Physical Properties    


Use concentration (spray or immersion)

3 - 10% by volume

Bulk Density

8.5 lbs/gal     

Operating Temps

70 °F to 160 °F      

pH, Concentrate

10.5 - 11.0

pH, @5%

10.3 - 10.8

VOC (Concentrate)

62 g/L    

Flash Point




Soluble in water    






Prevent rust from prossed parts
AquaKlean RP700 | In-Process Rust Protection | Water Based