|
|
|
|
NUGENTEC Bug-Kill Trade name: ONYXIDE® 200 (MSDS) Bug-Kill: A very effective sump side additive for bacterial and "odor" control in metalworking coolant sumps/tanks.Chemical Structure:
CAS Registry #: 4719-04-4 EPA Registration #: 1839-59 PCP Registration #: 25714 Applications: FOR METALWORKING COOLANT SYSTEMS: Use at 8 oz per 40 gallon sump. ONYXIDE 200 is miscible with soft and hard water (400 ppm CaCO3) in all proportions, and with alcohol and acetone in all proportions. ONYXIDE 200 is insoluble in ether, benzene, petroleum and chloroform. ONYXIDE 200 at the recommended use level does not contribute to corrosion of metal compounds. ONYXIDE 200 is compatible with other anionics, cationics, and nonionics at the proper pH range of 8-12. Product will lose activity below pH 5.0 and also in the presence of hydrogen peroxide at pH >10.
Typical Properties: Composition Active biocidal ingredients: Hexahydro 1,3,5 Tris (2-Hydroxyethyl)-s-Triazine...............78.5%
Inert Ingredients
.....................................................................21.5% Appearance @25°C..........................................Clear amber liquid Activity (MW 219), % ...............................................................78.5% Boiling Point, °C (°F)......................................................... 100 (212) Flash Point, PMCC, °C (°F)............................................ >94 (>201) pH (as is)...................................................................................... 10.5 Density, g/ml (lbs/U.S. gal)............................................... 1.15 (9.50) RVOC, U.S. EPA, % ........................................................................ 0
Toxicity: ONYXIDE 200 is slightly toxic orally (LD50 >0 .860g/kg) and dermally (LD50 >2g/kg) and it causes mild eye and slight skin irritation. The product is not mutagenic. Additional Safety Information A Material Safety Data Sheet is available upon request. ONYXIDE® is a registered trademark of Stepan Company. Storage & Normal safety precautions (i.e. gloves and safety goggles) should be employed when using ONYXIDE 200. Handling Contact with the eyes, nose or prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that ONYXIDE 200 be stored in sealed containers and kept in a cool dry place. Avoid overheating or freezing. Standard Packaging: ONYXIDE 200 is available in 1-gallon jugs and 5-gallon containers and 55-gallon drums. Clearances: All components of ONYXIDE 200 are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Europe (EINECS 225-208-0), Japan (ENCS 5-998), Canada (DSL 4719-04-4) and Australia (AICS 4719-04-4). ONYXIDE 200 is USDA approved for use in lubricants.
|
|
|
