|
|
|
|
NuKlean HDT 333:
Heavy-duty, highly
alkaline, low-temperature, chelated liquid cleaner.
Application Notes:
NuGeneration Technologies’
NuKlean HDT 333 is a heavy-duty, highly alkaline, chelated liquid cleaner.
Low-foaming for use in both spray and tank applications. An Excellent choice for Felt cleaning in
the pulp and paper industry,
the fast acting surfactants remove soils and rinse quickly.
NuKlean HDT 333 can be used at ambient
temperatures for the most demanding cleaning jobs on ferrous metals and
stainless steels. Chelated to work
well in hard water.
Removes: inks, polishing and buffing compounds, particulates, grease, oils,
dirt, fingerprints, drawing compounds, metalworking fluids and carbonaceous
deposits.
Application Procedure:
NuKlean HDT 333
is effective at ambient temperatures. However, it is normally used at 1 to 10%
by volume of water at ambient to 185
°F for
5 seconds to 5 minutes. (Note: use at higher temperatures for faster cleaning). The parameters can vary due to the type
and extent of soils to be removed.
Temperatures may be increase slightly for shorter time cycles. Not safe on Aluminum, aluminum alloys,
or zinc.
Typical usage parameters:
Physical Properties:
Availability:
Available in 5, 55 and 300
gallon containers. Bulk tank
shipments also available.
Shipment:
Freight classification is
“cleaning compound Liquid, 8, PG III (potassium hydroxide and sodium hydroxide
mixture), UN 1760.”
Storage:
Keep out of direct sunlight. Keep
from freezing. Store between 40-120
°F.
(1)Disposal:
Dispose of in accordance with local, state, & federal regulations. For assistance with disposal contact
NuGeneration Technologies at 888-99-NuGen or e-mail:
info@nugentec.com. |
|
|
