|
| |
Conversion Coatings: Iron
Phosphates
|
 |
Pre-paint conversion
coatings for Aluminum, Iron & Steel.
|
|
NuKoat products are
designed to clean and iron phosphate in one easy step. NuKoat
provides a superior foundation for painting providing excellent corrosion
resistance. NuGeneration Technologies’ NuKoat line of Iron Phosphates is
highly effective, cost efficient, and easy to use. NuGeneration
Technologies offers 5 stage iron phosphates for the most demanding jobs to
simple to use one step/no rinse iron phosphates. Best results are
achieved with 3 to 5 stage processes: See Charts Below. |
1 Stage process Flow
Chart:
2 & 3 Stage process Flow
Chart:
5 Stage process Flow
Chart:
|
Name &
Description |
Tech Data Sheet
(PDF format) |
MSDS |
NuKoat 55 and 55T:
Premium Pre-paint treatment for Ferrous Metals.
Also capable of conditioning Galvanized Steel, Zinc and Aluminum surfaces.
A low foaming, low temperature spray (or tank) that provides one step that
both cleans and coasts (iron phosphate). Does not contain
solvents (55 only), Molybdenum or HF activator (hydrofluoric acid). Environmentally Friendly.
Highest Coating weights, Lowest Foaming (55 only), No Salt Build Up, Fast
Rinsing, Ships as a Non-regulated Material "N.O.B.I.N. iron and rust
removing compound"
Our Best Selling Iron Phosphate
NuKoat 55 and 55T Meet
FEDERAL SPECIFICATION:
TT-C-490E: CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES
(BASE FOR ORGANIC COATINGS)
Coating weight procedures and process: 30-90 mg/ft2 coatings.
Product Launch Date: March 2007 |
NuKoat 55 - Spay Applications
NuKoat 55T - Tank Applications |
MSDS
MSDS |
NuKoat 53 MF:
Pre-paint treatment for Ferrous Metals.
Also capable of conditioning Galvanized Steel, Zinc and Aluminum surfaces.
A low to moderate foaming, low temperature spray (or tank) that provides one step that
both cleans and coasts (iron phosphate). Does not contain
solvents, Moly (molybdenum) or HF activator. Environmentally Friendly.
Faster Rinsing than our NuKoat 33 MF. Very low salt build up on
finished parts.
Coating weight procedures and process: 30-50 mg/ft2 coatings. |
NuKoat 53 MF |
MSDS |
NuKoat 33 MF:
multi-metal 2, 3 or 5 stage iron phosphate
conversion coating for tank or spray applications. Does not contain
solvents, Moly (molybdenum) or HF activator. Environmentally Friendly.
Coating weight procedures and process: 30-50 mg/ft2 coatings. |
NuKoat 33 MF |
MSDS |
|
NuKoat 78 T: multi-metal 2, 3
or 5 stage iron phosphate for tank application. Contains Moly(1)
and HF activators. |
NuKoat 78 T |
MSDS |
|
NuKoat 77MM: multi-metal 2, 3
or 5 stage iron phosphate for spray application. Contains Moly and HF
activators. |
NuKoat 77 MM |
MSDS |
|
NuKoat 33: multi-metal 2, 3 or
5 stage iron phosphate for tank application. Contains Moly activator.
NO Fluoride. |
NuKoat 33 |
MSDS |
|
NuKoat NR-MF: multi-metal 1 stage iron phosphate for tank application. Does
not Contain Moly or HF activator. |
NuKoat NRMF |
MSDS |
NuKoat Ultra Seal 4:
Non-chrome, Non-nitrated liquid final
rinse for Iron or Zinc phosphated metal surfaces. Enhances paint adhesion.
When combined with NuKoat Iron or Zinc phosphates UltraSeal improves Salt
Spray Testing hours by more than 50% over phosphating alone.
Our most effective Final Seal.
Product Launch
Date: January 2007 |
NuKoat Ultra Seal 4 |
MSDS |
| NuKoat Final Rinse 2:
Non-chrome, Non-nitrated liquid final
rinse for phosphated metal surfaces & plastic. Enhances paint adhesion. |
NuKoat Final Rinse 2 |
MSDS |
| NuKoat Seal 8 :
Non-chrome, Non-nitrated liquid final
rinse for phosphated metal surfaces & plastic. Enhances paint adhesion.
A more effective seal than our Final Rinse 2. |
NuKoat Final Seal 8 |
MSDS |
| NuKoat Final Seal RP10:
Final Rinse to control Flash
Rusting. Non-chrome, Non-nitrated and Non-staining liquid final
rinse for phosphated metal surfaces.
|
NuKoat
Final Seal RP10 |
MSDS |
- NOTES:
(1) Molybdate-based Iron
Phosphate conversion coating for aluminum and aluminum alloys as an
environmentally benign replacement of chromate-based conversion coatings.
The molybdate based iron phosphate conversion
coating can be applied by dipping, painting, or spraying, with short treatment
times at low temperatures, and is compatible with existing cleaning and
pretreatment procedures.
Some Municipalities are now requiring
products that are molybdate free...NuKoat
55 and 55T (also 53MF and 33 MF)
are iron phosphate
conversion coatings that meet OSHA and EPA regulations for
environmentally friendliness and worker safety.
- (2) Want to determine your own
coating weights (iron or zinc phosphate).
FEDERAL SPECIFICATION:
TT-C-490E: CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES
(BASE FOR ORGANIC COATINGS)
GOVERNMENT/SCIENCE/INDUSTRIAL APPLICATIONS FOR
CONVERSION COATINGS:
 | Government Applications
 | Navy (Std Missile, Phalanx, RAM, Tomahawk)
|
| Air Force (ACM, AMRAAM) |
| NASA |
| DOD Prime Contractors |
|
| Industrial Applications
| Aerospace
|
| Boilers
|
| Air conditioners
|
| Fusion rollers (copiers, laser printers, etc) |
| Aluminum construction materials |
| Pre-paint metal (Iron, cast iron, aluminum, steel) |
| Furniture, household appliances, pre-paint
metal fabrication |
| Iron Phosphate conversion coating paint and
powder coating lines |
| Road & Traffic Signs and Posts (Speed
limit signage, Street Signs) |
| Vehicle License Plates |
| Wrought Iron Railings |
| Fences |
| Coil Coating |
|
|
